Product Description
Winsonda WVD Transformer Oil Filter
Product Description
| No. |
Item |
Name |
No. |
Item |
Name |
| 1 |
MV01 |
Oil inlet valve |
12 |
LX01 |
Electrostatic collector filter element |
| 2 |
FL01 |
Suction filter |
13 |
JDT1 |
Electrostatic collector |
| 3 |
EL01 |
Negetive pressure gauge |
14 |
LZFL1 |
Iron resin exchange |
| 4 |
MV02 |
Particle counter detects the inlet |
15 |
LZLX1 |
Ion resin exchanger filter element |
| 5 |
1M1 |
Pump motor |
16 |
FL02 |
Collector |
| 6 |
YB01 |
Pump |
17 |
LX3 |
Protection filter element |
| 7 |
RV01 |
Safety valve |
18 |
MV06 |
Drain valve |
| 8 |
MV03 |
Particle counter detects the outlet |
19 |
BQ01 |
Automatic air vent valve |
| 9 |
MV04 |
Sample valve |
20 |
FS01 |
Float switch |
| 10 |
SP01 |
Pressure button |
21 |
MV07 |
Oil outlet valve |
| 11 |
MV05 |
Ball Valve |
|
|
|
Product Parameters
Working Priciple
a b
Winsonda WVD series oil purifier uses electrostatic adsorption technology, which uses a circular high-voltage electrostatic field to make the pollution particles in the oil respectively show positive and negative electronegativity. As shown in Figure 2-1 (a), positive and negative electric particles swim in the direction of negative and positive electrodes respectively under the action of electric field force, and neutral particles are crowded and moved by the charged particles. Finally, all particles are adsorbed on the collector to completely remove pollutants in the oil. As shown in Figure 2-1 (b), charged particles can strip a large amount of mud, paint film, and colloidal dirt attached to the component.
Electrostatic adsorption technology can remove the insoluble sludge/paint film in the oil and the paint film already attached to the components as early as possible in the process of oil degradation. A large number of cases have proved that the principle of electrostatic adsorption can remove the hard and soft pollutants in the submicron level into the oil during the oil cycle. At the same time, through the flow of oil particles with static electricity, the sludge impurities, paint film and oxides attached to the tank, pipe wall and components are washed and adsorbed to bring out, so that your system is away from sludge/paint film pollution. Visanta's electrostatic adsorption technology improves sludge/film removal by at least 200% compared to other comparable technologies.
Resin technology
Winsonda WVD series oil purifiers use ionic resin technology to remove soluble contaminants. Shear stress in the lubrication system leads to automatic degradation of oil, which is the root cause of sludge/film contamination. When these stresses are present, soft contamination can be caused, leading to control failure. For turbines, the low flow areas present in the lubricating oil system are particularly prone to oil degradation. When the turbine is running, because the oil temperature is high, these by-products of oil degradation are highly tolerable and not easy to be removed by electrostatic adsorption technology, and the ionic resin adsorption technology can remove soluble paint film products in the oil. As shown in Figure 2-2, the ionic resin can displace the acid oxides formed in the oil by releasing ions, quickly remove the dissolved paint film, and reduce the MPC value. At the same time, the ionic resin can quickly remove the deterioration products (colloidal and acidic products) that can not be adsorbed by other conventional adsorbents, thereby reducing the acid value of the oil and improving the emulsification performance of the oil.
Chart
Applicability
1.1 All petroleum lubricants.
1.2 Viscosity should be lower than 220Cst.
1.3 Oil temperature is 20-80ºC.
1.4 The moisture content ≤ 500ppm
Specifications
| No. |
Item |
Data |
| 1 |
Model (WVD SERIES) |
WVD-1,WVD-1-11C,WVD-11,WVD-11-11C |
| 2 |
Flow Rate(L/min) |
10 |
| 3 |
Power |
AC220V/50 Hz |
| 4 |
(KW) |
1 |
| 5 |
Weight(kg) |
280--525 |
| 6 |
Size(mm) |
1440×820×1510---1870×910×1840 |
| 7 |
Oil tank material |
304 |
| 8 |
Frame material |
Carbon steel |
| 9 |
Electric box material |
Carbon steel |
Filtration Effect
| No |
Item |
Technical |
| 1 |
Visually |
Clear |
| 2 |
Particle counter detection(NAS 1638) |
3-7 |
| 3 |
Filtration accuracy |
≥0.02µm(Paint film, gelatinous sludge can be completely removed) |
| 4 |
MPC |
<15 |
| 5 |
Long-term monitoring |
Hydraulic component failure completely eliminated |
Oil Filtration Series
Company Profile
Winsonda
Winsonda was founded in 2009 and headquartered in Kunshan, China. We are a leading supplier of advanced oil filtration solutions for solving the issues that enterprises suffer huge losses due to contaminated lubricants and hydraulic oil caused a large number of equipment failures, unplanned shutdowns, and forced replacement of new oil.
With a group of excellent engineers and well-buit manufacturing facility, Winsonda delivers high-quality of filtration units to remove particles, water and the by-products of oil degradation from your contaminated system. The technologies of varnish/sludge removal and contamination control have been used successfully in various applications such as, petrochemicals, coal chemicals,air separation,steel,vessel,electrical power etc.
We are proud to provide our products and solutions to help many industrial leaders to ease their maintenance works, increase their machine's reliability and save the cost. Up to now, more than 50 of Fortune 500 companies chose and trusted our service.
Product application range
Service
1 The warranty period is 1 year, lifetime warranty, and the service standard during the warranty period is consistent with that outside the warranty period;
2 Free installation and commissioning of equipment for normal operation, free training of customer equipment use personnel, arrange on-site training guidance, training content including product structure, safe use, daily maintenance and maintenance, independent skilled operation, etc.
3 Establish customer files. During the warranty period, we will learn about the use of equipment from customers every quarter, and pay a return visit to investigate the use of users at least twice a year outside the warranty period. Record the operating status and maintenance of the equipment. If on-site processing is required, our company will arrange after-sales service personnel to deal with the problem on site, and maintain the equipment to ensure long-term effective work of the equipment;
4 If the equipment fails, the customer can arrive at the scene within 48 hours for disposal. If the customer has special circumstances, the customer can arrive at the scene within 24 hours for disposal. Product three guarantees, strictly implement the relevant provisions of the national industrial product after-sales service;
5 Set a dedicated technical window (normal service on holidays) to quickly and targeted solve customer anomalies;
6 Timely supply of consumables and spare parts, and ensure delivery of conventional consumables and parts within 2 days;
7 Provide oil testing services to improve customers' oil pollution control and monitoring system.
Audited Supplier 
){kind=link}
){kind=link}