Who we are!!!
WSD specializes in oil cleaning and treatment, such as oil separation, particle removal, and sludge/varnish Remove. Our products use special electrostatic principles to adsorb particles, balance charge principle to remove particles, coalescence & separation to remove water principle, vacuum to remove water principle, and vacuum balance charge to remove water principle.
Product Introduction
The WMR™ is designed to be simple to use. Made with advanced membrane and aluminum housing. During the whole working process, the air flows through the precision membrane module, and then enters the oil tank from the pipeline of the equipment after dehumidification. The rated dew point temperature of Wasion WMR™ is -40ºC, and the dew point temperature of -40 is very important for removing the EHC fluid. moisture is extremely important.
The oil should be pre-filtered when filling to machines in operation that's the best way to control contaminations entering your lubricating system. WMR is an ideal product to meet such needs. It adopts a durable gear pump and high-efficiency filter cartridge(3-stage filtration) protecting the lubrication & hydraulic system away foreign contaminants.
Features
>> Prevents contaminants from entering the oil tank through air.
>> Remove moisture not only from the headspace of the reservoir but also from the oil by dry air.
>> Keeps the water content of fire-resistant oil below 150PPM.
>> Improves the resistivity of fire-resistant oil and slows down the oil oxidation cycle.
>> Prevents the formation of acids and reduces the need for acid removal filters.
>> Patented air drying membrane with a special tubing case to lower the gas dew point to -40ºC.
>> Less maintenance time and labor required.
>> Low investment cost and high ROI.
Working Principle
Balanced charge coalescence-submicron filtration
The diagram of moisture movement in the reservoir
Application & Installation
Related Products
Main Customer