Product Description
Winsonda WZJC Insulation Oil Discoloration Purifier Device Transformer Oil Filtration
Product Description
| No. |
Item |
Name |
No. |
Item |
Name |
| 1 |
MV01 |
Oil inlet valve |
15 |
HWXP |
Infrared defoaming controller |
| 2 |
MV02 |
Filter blowdown valve |
16 |
YWJ01 |
Liquid level gauge |
| 3 |
FL01 |
Filter |
17 |
GCSC |
Watching window |
| 4 |
MV03 |
Filter exhaust valve |
18 |
YB01 |
Voccum pump |
| 5 |
JRQ |
Heater |
19 |
MV10 |
Vacuum chamber blowdown valve |
| 6 |
MV04 |
Heater blowdown valve |
20 |
M1 |
Motor |
| 7 |
FAN |
Cooling system |
21 |
YB01 |
Pump |
| 8 |
MV05 |
Internal circulation manual valve |
22 |
RV01 |
Safe valve |
| 9 |
MV06 |
Inlet valve |
23 |
DX01 |
One-way valve |
| 10 |
MV07 |
Drain valve |
24 |
SP01 |
Pressure switch |
| 11 |
ZKG |
Voccum pump |
25 |
MV11 |
Blowdown valve |
| 12 |
MV08 |
Air valve |
26 |
MV12 |
Oil outlet valve |
| 13 |
MV09 |
Vacuum regulating valve |
27 |
FL02 |
Filter |
| 14 |
EL01 |
Pressure gauge |
28 |
MV13 |
Filter element |
Product Parameters
Working Priciple
water removal
Winsonda WJZ after the oil from the purification tank enters the vacuum oil purifier, it is first passed through the coarse filter to remove some of the larger particles. Then in a certain vacuum state, the heater is used to heat the oil to a suitable temperature, and then the oil is spread in the vacuum tank through the diffusion device to increase the exposed area of the oil. Because the boiling point of water and oil is different under different vacuum conditions, the water boils into water vapor, which is sucked into the condenser by the vacuum pump and discharged, and the oil liquid that has removed the water is transported to the fine filter through the oil pump, and then filtered back to the tank. In the high vacuum state, the boiling point of water drops rapidly, and the difference between the boiling point of oil is very large. In the vacuum water removal system, the oil is heated and stabilized at about 60 ° C, while in the vacuum environment, the water will be violently evaporated. In the vacuum separation chamber, the oil passes through the nozzle to form a coarse particle fog, which greatly increases the evaporation area and improves the evaporation efficiency. After the separation of oil and water, the water vapor generated by boiling is sucked away by the vacuum pump, and the oil is discharged by the outlet pump connected to the vacuum separation chamber.
Chart
Applicability
1.1 All petroleum lubricants.
1.2 Viscosity should be lower than 220Cst.
1.3 Oil temperature is 20-80ºC.
1.4 The moisture content ≤ 10%
Specifications
| No. |
Item |
Data |
| 1 |
Model (WJYJ SERIES) |
WJZ-30,WJZ-50, |
| 2 |
Flow Rate(L/min) |
30(WJZ-30),50(WJZ-50), |
| 3 |
Power |
AC220V/50 Hz |
| 4 |
(KW) |
21.5--23 |
| 5 |
Weight(kg) |
615--670 |
| 6 |
Size(mm) |
1585×1630×1820---1655×1570×1825 |
| 7 |
Oil tank material |
Carbon steel |
| 8 |
Frame material |
Carbon steel |
| 9 |
Electric box material |
Carbon steel |
Filtration Effect
| No |
Item |
Technical |
| 1 |
Visually |
Clear |
| 2 |
Particle counter detection(NAS 1638) |
3-7 |
| 3 |
Filtration accuracy |
≥0.1µm |
| 4 |
Trace Moisture tester Test moisture content (PPM) |
≤50 |
| 5 |
Long-term monitoring |
Hydraulic component failure completely eliminated |
Oil Filtration Series
Company Profile
Winsonda
Winsonda was founded in 2009 and headquartered in Kunshan, China. We are a leading supplier of advanced oil filtration solutions for solving the issues that enterprises suffer huge losses due to contaminated lubricants and hydraulic oil caused a large number of equipment failures, unplanned shutdowns, and forced replacement of new oil.
With a group of excellent engineers and well-buit manufacturing facility, Winsonda delivers high-quality of filtration units to remove particles, water and the by-products of oil degradation from your contaminated system. The technologies of varnish/sludge removal and contamination control have been used successfully in various applications such as, petrochemicals, coal chemicals,air separation,steel,vessel,electrical power etc.
We are proud to provide our products and solutions to help many industrial leaders to ease their maintenance works, increase their machine's reliability and save the cost. Up to now, more than 50 of Fortune 500 companies chose and trusted our service.
Product application range
Service
1 The warranty period is 1 year, lifetime warranty, and the service standard during the warranty period is consistent with that outside the warranty period;
2 Free installation and commissioning of equipment for normal operation, free training of customer equipment use personnel, arrange on-site training guidance, training content including product structure, safe use, daily maintenance and maintenance, independent skilled operation, etc.
3 Establish customer files. During the warranty period, we will learn about the use of equipment from customers every quarter, and pay a return visit to investigate the use of users at least twice a year outside the warranty period. Record the operating status and maintenance of the equipment. If on-site processing is required, our company will arrange after-sales service personnel to deal with the problem on site, and maintain the equipment to ensure long-term effective work of the equipment;
4 If the equipment fails, the customer can arrive at the scene within 48 hours for disposal. If the customer has special circumstances, the customer can arrive at the scene within 24 hours for disposal. Product three guarantees, strictly implement the relevant provisions of the national industrial product after-sales service;
5 Set a dedicated technical window (normal service on holidays) to quickly and targeted solve customer anomalies;
6 Timely supply of consumables and spare parts, and ensure delivery of conventional consumables and parts within 2 days;
7 Provide oil testing services to improve customers' oil pollution control and monitoring system.
Audited Supplier 
){kind=link}
){kind=link}